2KW Wind Generator

- Brushless 3-phase permanent magnet generator
- 2kw (Max. 3kw)
- For Use With 24V, 36V, 48V
- CE Certification
The OEM 2KW Wind Generator has been carefully engineered and is of Heavy Duty Industrial Construction. Made of heavy gauge steel, Powder Coated, and designed to last for 10 to 20 years. The Generator, Nacelle, Blades & Tail, have a total weight of 40 kilograms.

The windmill can be used to charge a 24V battery bank. If you have an “annual wind speed " of 11 MPH at your site you can expect to generate 1,636 Kilowatts per year.

All parts are guaranteed for 3 years against defects of material or workmanship. The windmill can be used to charge a 24V battery bank, If you have an “annual wind speed " of 11 MPH at your site you can expect to generate 5,840 Kilowatts per year.

Power curve for charging 24V battery banks!


Packing for Generator , & Nacelle with Styrofoam and double thick Export Carton


100Amp @ 1600Volt Yaw with double bearing & slip ring assembly
Bridge Rectifier

----------------------OPTIONAL---------------------

This is a heavy duty Dump Load Which Contains two large two ohm wire wound Resistors it has been
especially Designed As a dump load for Wind Generator Use.

The one millimeter steel case is gray Powder coated for many years of heavy use.

The wiring terminals have an extra cover, to protect the terminals and to assure safe operation and use.

USD : 177 (FOB Ningbo, China)
( not included with the generator )

Dynamic Braking System, this unit will Automatically monitor the rotor speed and keep it at or below 500
RPM. When the wind is very strong, and Dynamic Braking is activated.
The power from the generator is diverted to the Dump Load, which slows the rotor until it is slightly
below 500 RPM, this allows you to get the most watts possible from the wind.

USD: 183 (FOB Ningbo China)
( not included with the generator )


US$ 76.00
FOB Ningbo China
( not included with the generator )

The OEM data Recorder is a powerful tool unique to OEM that allows you to record the windmills performance to a computer 24 hours a day.

The data can be viewed in graph form, as well as plotted to a power curve graph in respect to RPM.

The recorder will allow for 4 parameters to be recorded, Battery Voltage, Amps Generated, Windmill RPM, & Wind Speed (with the use of an optional Anemometer not supplied).