HY-10KW Variable Pitch Wind Turbine

Markedly improved utilization of wind energy With a strong wind resistance
Wind speed area could extend to 3m/s ~25m/s.
How to Variable Pitch in different wind speed by wind turbine
1.Under the wind speed of 0m/s ~ 3m/s, the turbine blade remain static ,and the start-angle formed between the blade and turbine plane;The blade angle will under a start-angle,the blade is most easily to be started up.
2.As long as the wind speed reached 3m/s, the blades will begin to rotate, during the rotation, the outermost edge of the blade will be driven by the centrifugal force generated by the rotation of the blade to tilt toward the turbine plane, the blade angle will decrease until 0° when the blade is in parallel with the turbine plane; at this angle ,the turbine has nearly reached its rated output power.
3.When the wind speed is between 11m/s ~25m/s ,the blade will keep adjusting its position forth and backward slightly to let the angle fluctuate a little bit but maintain at around 0°roughly, so as to stabilize its rated power.
4.Within the wind speed of 25m/s ~ 50m/s ,when the wind has exceeded its rated speed , the wind will keep drawing the blade by the centrifugal force,so the blade angle will continue to decrease and turn into a negative angle ,under this negative angle, the rotation of blade will produce a resistance on the rotation of turbine blade to slow down the rotation and protect the wind turbine from over speed operation, the maximum RPM of the turbine will be no more than 220 RPM.

HY-10KW Variable Pitch

Markedly improved utilization of wind energy With a strong wind resistance Wind speed area could extend to 3m/s ~25m/s.
Under the wind speed of 0m/s ~ 3m/s, the turbine blade remain static ,and the angle X1 formed between the blade and turbine plane is B° (X1= B°);under this angle ,the blade is most easily to be started up. As long as the wind speed reached 3m/s, the blades will begin to rotate, during the rotation, the outermost edge of the blade will be driven by the centrifugal force generated by the rotation of the blade to tilt toward the turbine plane, the aforementioned angle X1 will decrease until 0° when the blade is in parallel with the turbine plane; at this angle, the turbine has nearly reached it’s rated output power. When the wind speed is between 11m/s~25m/s, the blade will keep adjusting its position forth and backward slightly to let the angle X1 fluctuate a little bit but maintain at around 0°roughly, so as to stabilize its rated power. Within the wind speed of 25m/s~50m/s ,when the wind has exceeded it’s rated speed , the wind will keep drawing the blade by the centrifugal force, so the angle X1 will continue to decrease and turn into a negative angle X1= -B°(PS: B° and -B° is not the same),under this negative angle, the rotation of blade will produce a resistance on the rotation of turbine blade to slow down the rotation and protect the wind turbine from over speed operation, the maximum RPM of the turbine will be no more than 220RPM.(A,B,C: 3 pieces of Blades; a,b,c:3 pieces of centrifugal hammers)

HY-10KW Wind Turbine Generator

It is an adjustable pitch model with high efficiency and good operation when meet the big wind speed.
Technical parameters:
1. Rated power: 10kW
2. Maximum power: 12.5kW
3. Rated wind speed: 11m/s
4. Start up wind speed: 3m/s
5. Working wind speed: 4-25m/s
6. Survived wind speed: 50m/s
7. Rated rotate speed: 200r/min
8. Rotor diameter: 7.2m
9. Working voltage: DC300V/AC220V
10. Blades material*number: Fiberglass-reinforced plastics*3
11. Speed regulation: Passive pitch
12. Generator style: 3-phase AC PM
13. Tower height: 10m
14. Stop method: Positive pitch
15. Wind turbine body weight: 500kg
16. Guyed tower weight: 500kg
17. Freestanding tower weight: 900kg
18. Annual generation min/max: 10000/30000kwh

HY-20KW Wind Turine

Our company produces and sells the middle and small type wind generators including 400w/2kw/5kw/20kw/25kw/30kw
Tech parameters:
1) Rotor diameter: 10M
2) Blade material & number: fiber glass epoxy*3
3) Rated wind speed: 12m/s
4) Rated output power: 20000W
5) Rated rotate speed: 160r/min
6) Maximum power: 2250W
7) Working voltage: DC500V/AC380V
8) Startup wind speed: 3m/s
9) Generator style: Permanent magnet 3-phase AC
10) Speed regulation:Yawing & Electromagnetic brake
11) Tower height: 15M (Freestanding tower)
12) Weight exclude tower: 1360kg

HY-25KW Axis Wind turbine

Using fit for farm and factory
Automatic Tail folding
:
When the output power exceeded the limit value, the control box will instruct the battery(12V) to supply the winch power and let the steel wire rope inside the electric winch to pull the tail vane with a speed of 0.05~0.1m/s , so as to drive the rotor yawing; When yawing angle is 45°~60°,the power output can be reduced to 50%, when the yawing angle reached 80°, the “Push rod” will be triggered to let the brake system to stop the running of rotor completely.

HY-25KW Wind Turbine

Fit For Farm and Factory Using
TECH PARAMETER:
1) Rotor diameter:10m
2) Blade material & number: fiber glass epoxy*3
3) Rated output power: 25kw
4) Rated rotate speed: 185r/min
5) Maximum power: 30kw
6) Working voltage: DC540V/AC380V
7) Startup wind speed: 3m/s
8) Generator style: Permanent magnet 3 phase AC
9) Speed regulation: Yawing and electric magnet
10) Tower height: 15m
11) Weight exclude tower: 1370kg

10kw family wind turbine

1.10kw family wind turbine
2.high quality and best price
3.little noise
4.excellent in quality
5.good reputation
10kw family wind turbine

Main technical parameter
Model
FD7.5-10/11
Rated power
10000W
Rated voltage
DC 360
Rotor diameter
10m
Start-up wind speed
4m/s
Rated wind speed
11m/s
Security wind speed
45m/s
Working wind speed
4~25
Free standing tower height
12m
Speed regulation method
Mechanical yawing+ Electromagnetic Brake+Manual brake
Environment temperature
from -25to +45
Rated RPM
260r/m
Shell material
Precision Steel
Blade material
fiber glass
Blade quantity(pcs)
3
Generator style
Three-phase AC PMG
Certificate
CE, ISO9001 quality standards


1, All of our products conform to CE and ISO9001 quality standards.
2, We launched 300w, 400w, 500w, 1kw, 2kw, 3kw, 5kw, 10kw, 20kw wind generator.
3, Welcome to visit our website (effsun.en.alibaba.com).For more information fls tell us.
4,We will bringing you the best service available.

Effsun service promise
Pre-sale service
1,We offer free new energy technology, products Consultation.
2,We can offer high reliability solution with local conditions.
3,Under the premise of insurance of reliability, we insist the idea that saving every penny for you!.
Selling
1.Abide by the contract, active service through whole process.
2. Quality first, delivery on time.
3. Offer free using, maintain and installation advisory.
After-sale services
1,Built up full and traceable file of quality of products.
2,Pay a return visit at regular intervals.
3,Respond the fault condition reported within 2hours,then make the solution within 24 hours.

Applications:
Small air conditioner, small refrigerator, washer, water pump, electric cooker, color TV, lighting, electric fan and battery charging.

For more information, please tell us, we will bring you the best service available.

HY-2KW Variable Pitch Wind Turbine

Markedly improved utilization of wind energy With a strong wind resistance
Wind speed area could extend to 2.5m/s ~25m/s.
How to Variable Pitch in different wind speed by wind turbine
1.Under the wind speed of 0m/s ~ 2.5m/s, the turbine blade remain static ,and the start-angle formed between the blade and turbine plane;The blade angle will under a start-angle,the blade is most easily to be started up.
2.As long as the wind speed reached 2.5m/s, the blades will begin to rotate, during the rotation, the outermost edge of the blade will be driven by the centrifugal force generated by the rotation of the blade to tilt toward the turbine plane, the blade angle will decrease until 0° when the blade is in parallel with the turbine plane; at this angle ,the turbine has nearly reached its rated output power.
3.When the wind speed is between 9m/s ~25m/s ,the blade will keep adjusting its position forth and backward slightly to let the angle fluctuate a little bit but maintain at around 0°roughly, so as to stabilize its rated power.
4.Within the wind speed of 25m/s ~ 50m/s ,when the wind has exceeded its rated speed , the wind will keep drawing the blade by the centrifugal force,so the blade angle will continue to decrease and turn into a negative angle ,under this negative angle, the rotation of blade will produce a resistance on the rotation of turbine blade to slow down the rotation and protect the wind turbine from over speed operation, the maximum RPM of the turbine will be no more than 380 RPM.

HY-2KW Wind Driven Generator CE,RoHS

The middle and small type wind generators including:
400w/2kw/5kw/15kw/20kw/25kw etc.
TECH PARAMETER:
1) Rotor diameter: 4M
2) Blade material & number: Fiber glass epoxy*3
3) Rated output power: 2000W
4) Rated rotate speed: 360r/min
5) Maximum power: 2400w
6) Working voltage: DC48V/240V/AC220V
7) Startup wind speed: 2.5m/s
8) Generator style: Permanent magnet 3 phase AC
9) Speed regulation: Adjustable pitch
10) Tower height: 6m
11) Guyed Tower weight: 100kg
12) Freestanding tower weight: 230kg
13) Weight exclude tower: 130kg
14) Packing:Wooden box & Soft package

HY-2KW Wind Power Generator

Our company produces and sells the middle and small type wind generators including 400w/2kw/5kw/10kw/15kw/20kw/25kw
TECH PARAMETER:
1) Rotor diameter: 4M
2) Blade material & number: Fiber glass epoxy*3
3) Rated output power: 2000W
4) Rated rotate speed: 360r/min
5) Maximum power: 2400w
6) Working voltage: DC48V/240V/AC220V
7) Startup wind speed: 2.5m/s
8) Generator style: Permanent magnet 3 phase AC
9) Speed regulation: Adjustable pitch
10) Tower height: 6m
11) Guyed Tower weight: 100kg
12) Freestanding tower weight: 230kg
13) Weight exclude tower: 130kg
14) Packing:Wooden box & Soft package

HY-2KW Wind Power Generator

The middle and small type wind generators,
Including 400w/2kw/5kw/10kw/15kw/20kw/25kw
TECH PARAMETER:
1) Rotor diameter: 4M
2) Blade material & number: Fiber glass epoxy*3
3) Rated output power: 2000W
4) Rated rotate speed: 360r/min
5) Maximum power: 2400w
6) Working voltage: DC48V/240V/AC220V
7) Startup wind speed: 2.5m/s
8) Generator style: Permanent magnet 3 phase AC
9) Speed regulation: Adjustable pitch
10) Tower height: 6m
11) Guyed Tower weight: 100kg
12) Freestanding tower weight: 230kg
13) Weight exclude tower: 130kg
14) Packing:Wooden box & Soft package

HY-30KW Farm Wind Generator

Our company produces and sells the middle and small type wind generators including 2kw to 30kw
HY-30KW Variable Pitch Principle

Under the wind speed of 0m/s ~ 3m/s, the turbine blade remain static ,and the angle X1 formed between the blade and turbine plane is B° (X1= B°);under this angle ,the blade is most easily to be started up. As long as the wind speed reached 4m/s, the blades will begin to rotate, during the rotation, the outermost edge of the blade will be driven by the centrifugal force generated by the rotation of the blade to tilt toward the turbine plane, the aforementioned angle X1 will decrease until 0° when the blade is in parallel with the turbine plane; at this angle ,the turbine has nearly reached it’s rated output power. When the wind speed is between 12m/s ~25m/s ,the blade will keep adjusting it’s position forth and backward slightly to let the angle X1 fluctuate a little bit but maintain at around 0°roughly, so as to stabilize it’s rated power. Within the wind speed of 25m/s ~ 50m/s ,when the wind has exceeded it’s rated speed , the wind will keep drawing the blade by the centrifugal force,so the angle X1 will continue to decrease and turn into a negative angle X1= - B°(PS: B°and - B°is not the same),under this negative angle, the rotation of blade will produce a resistance on the rotation of turbine blade to slow down the rotation and protect the wind turbine from over speed operation, the maximum RPM of the turbine will be no more than 140 RPM.

HY-30KW Variable Pitch Axis Wind Turbine

Our company produce and sell the middle and small type wind generators including 2kw to 30kw which could Variable Pitch
How to Variable Pitch in different wind speed by wind turbine
1.Under the wind speed of 0m/s ~ 3m/s, the turbine blade remain static ,and the start-angle formed between the blade and turbine plane;The blade angle will under a start-angle,the blade is most easily to be started up.
2.As long as the wind speed reached 3m/s, the blades will begin to rotate, during the rotation, the outermost edge of the blade will be driven by the centrifugal force generated by the rotation of the blade to tilt toward the turbine plane, the blade angle will decrease until 0° when the blade is in parallel with the turbine plane; at this angle ,the turbine has nearly reached its rated output power.
3.When the wind speed is between 12m/s ~25m/s ,the blade will keep adjusting its position forth and backward slightly to let the angle fluctuate a little bit but maintain at around 0°roughly, so as to stabilize its rated power.
4.Within the wind speed of 25m/s ~ 50m/s ,when the wind has exceeded its rated speed , the wind will keep drawing the blade by the centrifugal force,so the blade angle will continue to decrease and turn into a negative angle ,under this negative angle, the rotation of blade will produce a resistance on the rotation of turbine blade to slow down the rotation and protect the wind turbine from over speed operation, the maximum RPM of the turbine will be no more than 140 RPM.

HY-30KW Variable Pitch Wind Turbine

Our company produce and sell the middle and small type wind generators including 2kw to 30kw which could Variable Pitch
How to Variable Pitch in different wind speed by wind turbine
1.Under the wind speed of 0m/s ~ 3m/s, the turbine blade remain static ,and the start-angle formed between the blade and turbine plane;The blade angle will under a start-angle,the blade is most easily to be started up.
2.As long as the wind speed reached 3m/s, the blades will begin to rotate, during the rotation, the outermost edge of the blade will be driven by the centrifugal force generated by the rotation of the blade to tilt toward the turbine plane, the blade angle will decrease until 0° when the blade is in parallel with the turbine plane; at this angle ,the turbine has nearly reached its rated output power.
3.When the wind speed is between 12m/s ~25m/s ,the blade will keep adjusting its position forth and backward slightly to let the angle fluctuate a little bit but maintain at around 0°roughly, so as to stabilize its rated power.
4.Within the wind speed of 25m/s ~ 50m/s ,when the wind has exceeded its rated speed , the wind will keep drawing the blade by the centrifugal force,so the blade angle will continue to decrease and turn into a negative angle ,under this negative angle, the rotation of blade will produce a resistance on the rotation of turbine blade to slow down the rotation and protect the wind turbine from over speed operation, the maximum RPM of the turbine will be no more than 140 RPM.

HY-30KW Variable Pitch Wind Turbine

Our company produce and sell the middle and small type wind generators including 2kw to 30kw which could Variable Pitch
How to Variable Pitch in different wind speed by wind turbine
1.Under the wind speed of 0m/s ~ 3m/s, the turbine blade remain static ,and the start-angle formed between the blade and turbine plane;The blade angle will under a start-angle,the blade is most easily to be started up.
2.As long as the wind speed reached 3m/s, the blades will begin to rotate, during the rotation, the outermost edge of the blade will be driven by the centrifugal force generated by the rotation of the blade to tilt toward the turbine plane, the blade angle will decrease until 0° when the blade is in parallel with the turbine plane; at this angle ,the turbine has nearly reached its rated output power.
3.When the wind speed is between 12m/s ~25m/s ,the blade will keep adjusting its position forth and backward slightly to let the angle fluctuate a little bit but maintain at around 0°roughly, so as to stabilize its rated power.
4.Within the wind speed of 25m/s ~ 50m/s ,when the wind has exceeded its rated speed , the wind will keep drawing the blade by the centrifugal force,so the blade angle will continue to decrease and turn into a negative angle ,under this negative angle, the rotation of blade will produce a resistance on the rotation of turbine blade to slow down the rotation and protect the wind turbine from over speed operation, the maximum RPM of the turbine will be no more than 140 RPM.

HY-30kW Wind Generator

The middle and small type wind generators including 2kw to 30kw
HY-30KW Variable Pitch Principle
Under the wind speed of 0m/s ~ 3m/s, the turbine blade remain static ,and the angle X1 formed between the blade and turbine plane is B° (X1= B°);under this angle ,the blade is most easily to be started up. As long as the wind speed reached 4m/s, the blades will begin to rotate, during the rotation, the outermost edge of the blade will be driven by the centrifugal force generated by the rotation of the blade to tilt toward the turbine plane, the aforementioned angle X1 will decrease until 0° when the blade is in parallel with the turbine plane; at this angle ,the turbine has nearly reached it’s rated output power. When the wind speed is between 12m/s ~25m/s ,the blade will keep adjusting it’s position forth and backward slightly to let the angle X1 fluctuate a little bit but maintain at around 0°roughly, so as to stabilize it’s rated power. Within the wind speed of 25m/s ~ 50m/s ,when the wind has exceeded it’s rated speed , the wind will keep drawing the blade by the centrifugal force,so the angle X1 will continue to decrease and turn into a negative angle X1= - B°(PS: B°and - B°is not the same),under this negative angle, the rotation of blade will produce a resistance on the rotation of turbine blade to slow down the rotation and protect the wind turbine from over speed operation, the maximum RPM of the turbine will be no more than 140 RPM.

HY-5KW Axis Wind Turbine

HY-5KW Axis Wind Turbine
New type has a new technic called adjustble-pitch
Technical Parameter:
1) Rated output power: 5000W
2) Rotor diameter: 5.6M
3) Rated rotate wind speed: 240r/min
4) Working Voltage: DC240V/AC220V
5) Rated wind speed: 11m/s
6) Working wind speed: 3~25m/s
7) Generator style: Permanent magnet 3-phase AC
8) Speed regulation: Adjustable-pitch
9) Guyed Tower height: 8Meters
10) Weight exclude tower: 340kg

10kw farm wind power generator

1. 30% more electricity generated
2. Low start-up wind speed
3. Centrifugal pitch controlled mechanism
4. Maintenance free


1.
Huaya pitch controlled wind turbine introduce:

Huaya 10kw pitch controlled wind turbine adopt:
Wind speed control blades angle changing. The blades angle twists according to the wind speed, this will change the blades itself aerodynamic characteristic to control wind turbine rotation speed. In the same time, the generator inside structure will displacement. This will make the generator output power constantly.

2.
Huaya pitch controlled wind turbine features

Blades rotor:
Blades rotor efficiency can reach 0.42. Noise level is less than 65db, and balance adjustment has been carried out strictly before leaving factory.
Generator:
Blades rotor dirve directly. Lower rotation speed, PMG synchronous generator, over load capacity is 150%.
Pitch controlled wind turbine:
Adopt stable pitch controlled system, can be used in variable environments
Low failure rate
Speed regulate Performance:
The precision of pitch controlled system is 10 r/min, and never over speed at gale.
Low Start-up Wind Speed:
According to different wind conditions, adjust the blade initial
angle to make wind turbine start up at low wind speed.
The start-up wind speed is <2.5m/s.
Manual brake:
Realiable brakeing system, easy to operate, can stop wind turbine at any time.
Automatically undo cable:
Slip ring undo the cable automatically. Ensure the cable has not twist. Double carbon brushes structure make sure power transfer without failure.
Well-adapted Wind turbine:
The operation wind speed is 3-30m/s.

3.
Huaya pitch controlled wind turbine 10kw technical data

Blades rotor Diameter (m)
7.2
Material and number of the blades
FRB 3 PCS
Rated power / max power (w)
10k/12k
Rated wind speed (m/s)
12
Startup wind speed (m/s)
2.5
Working wind speed (m/s)
3-30
Survived wind speed (m/s)
50
Rated rotation speed (r/min)
220
Working Voltage (V)
DC400v-600V
Generator style
3 phases,AC PMG
Speed regulation method
Pitch controlled + yawing + electromagnet brake
Stop method
Brake by hand drag
Working system
Off-grid working system/on grid woring system
Guy wire tower Height
10m,12m,15m
Tilting up Tower height
10m,12m,15m















4.
Noise level. Pls contact with us for it.

www.huayaturbine.com

HY-5KW Variable Pitch Wind Turbine

Markedly improved utilization of wind energy With a strong wind resistance
Wind speed area could extend to 2.5m/s ~25m/s.
How to Variable Pitch in different wind speed by wind turbine
1.Under the wind speed of 0m/s ~ 3m/s, the turbine blade remain static ,and the start-angle formed between the blade and turbine plane;The blade angle will under a start-angle,the blade is most easily to be started up.
2.As long as the wind speed reached 3m/s, the blades will begin to rotate, during the rotation, the outermost edge of the blade will be driven by the centrifugal force generated by the rotation of the blade to tilt toward the turbine plane, the blade angle will decrease until 0° when the blade is in parallel with the turbine plane; at this angle ,the turbine has nearly reached its rated output power.
3.When the wind speed is between 11m/s ~25m/s ,the blade will keep adjusting its position forth and backward slightly to let the angle fluctuate a little bit but maintain at around 0°roughly, so as to stabilize its rated power.
4.Within the wind speed of 25m/s ~ 50m/s ,when the wind has exceeded its rated speed , the wind will keep drawing the blade by the centrifugal force,so the blade angle will continue to decrease and turn into a negative angle ,under this negative angle, the rotation of blade will produce a resistance on the rotation of turbine blade to slow down the rotation and protect the wind turbine from over speed operation, the maximum RPM of the turbine will be no more than 277 RPM.

HY-5KW Variable Pitch Wind Turbine

Markedly improved utilization of wind energy With a strong wind resistance
Wind speed area could extend to 2.5m/s ~25m/s.
How to Variable Pitch in different wind speed by wind turbine
1.Under the wind speed of 0m/s ~ 3m/s, the turbine blade remain static ,and the start-angle formed between the blade and turbine plane;The blade angle will under a start-angle,the blade is most easily to be started up.
2.As long as the wind speed reached 3m/s, the blades will begin to rotate, during the rotation, the outermost edge of the blade will be driven by the centrifugal force generated by the rotation of the blade to tilt toward the turbine plane, the blade angle will decrease until 0° when the blade is in parallel with the turbine plane; at this angle ,the turbine has nearly reached its rated output power.
3.When the wind speed is between 11m/s ~25m/s ,the blade will keep adjusting its position forth and backward slightly to let the angle fluctuate a little bit but maintain at around 0°roughly, so as to stabilize its rated power.
4.Within the wind speed of 25m/s ~ 50m/s ,when the wind has exceeded its rated speed , the wind will keep drawing the blade by the centrifugal force,so the blade angle will continue to decrease and turn into a negative angle ,under this negative angle, the rotation of blade will produce a resistance on the rotation of turbine blade to slow down the rotation and protect the wind turbine from over speed operation, the maximum RPM of the turbine will be no more than 277 RPM.

HY-5KW Wind Power Generator

5kW new type wind power generator has a new technic called adjustble-pitch
5kW wind power generator
Technical Parameter:
1) Rated output power: 5000W
2) Rotor diameter: 5.6M
3) Rated rotate wind speed: 240r/min
4) Working Voltage: DC240V/AC220V
5) Rated wind speed: 11m/s
6) Working wind speed: 3~25m/s
7) Generator style: Permanent magnet 3-phase AC
8) Speed regulation: Adjustable-pitch
9) Guyed Tower height: 8Meters
10) Weight exclude tower: 340kg

HY-5KW Wind Power Generator

Tech parameter:
1. Rotor diameter: 5.6m
2. Blade material & number: fiber glass epoxy & 3
3. Rated wind speed
Tech parameter:
1. Rotor diameter: 5.6m
2. Blade material & number: fiber glass epoxy & 3
3. Rated wind speed: 11m/s Rated output power: 10kw
4. Rated rotate speed: 200r/min
5. Maximum power: 5.4kw
6. Working voltage: DC240V/AC220V
7. Startup wind speed: 3m/s
8. Working wind speed: 4-25m/s
9. Generator style: Permanent magnet 3 phase AC
10. Tower weight: 8m
11. Weight exclude tower: 500kg
12. Packing: Wooden box

HY-5KW Wind Turbine

Our company produces and sells the middle and small type wind generators including 2kw/TO 30kw
Technical
1). parameters:5kw
2) Rotor diameter: 5.6m
3) Blade material & number: fiber glass epoxy*3
4) Rated wind speed: 11m/s
5) Rated output power: 5kW
6) Rated rotate speed: 240r/min
7) Maximum power: 5.4kW
8) Working voltage: DC240V/220V
9) Startup wind speed: 3m/s
10) Generator style: Permanent magnet 3-phase AC
11) Speed regulation: PITCH CONTROL
12) Tower height: 8m (higher tower can be special made)
13) Weight exclude tower:340kg
14) Packing:Wooden box & Soft Package

HY-5kw pitch controlled wind power generator

1. 30% more electricity generated
2. Low start-up wind speed
3. Centrifugal pitch controlled mechanism
4. Maintenance free

5kw pitch controlled wind turbine technical data:

Blades rotor Diameter (m)
5.4
Material and number of the blades
FRB 3 PCS
Rated power / max power (w)
5k/6k
Rated wind speed (m/s)
10
Startup wind speed (m/s)
2
Working wind speed (m/s)
3-30
Survived wind speed (m/s)
50
Rated rotation speed (r/min)
260
Working Voltage (V)
DC48--500v
Generator style
3 phases,AC PMG
Speed regulation method
Pitch controlled + yawing + electromagnet brake
Stop method
Brake by hand drag
Working system
Off-grid working system/on grid woring system
Guy wire tower Height
8m,9m,10m,12m,15m
Tilting up Tower height
8m,9m,10m,12m,15m

Hand Dynamo with 2W output

(1)Hand Dynamo with 2W output
(2)Output: 8-10V; 400mA
(3)Dimension(mm): 50X33X30
(4)Normal Use: Flashlight, Lantern
Hand Dynamo ZSFD-HFC is a small Alternator which can give 2W output with 3000 rpm Rotating Speed. It is widely used for Flashlight, Lantern and other portable electronic product etc .

The Specification of it is Below:

1. Electric Performance

(1)Rated Rotating Speed: 3000r/min
(2)Rated Current: ≥400mA
(3)DC Voltage Output: ≥11V DC
(4)AC Voltage Output: ≥8V AC
(6)Line to Line Resistance: 10Ω±0.5Ω

2. Mechanical Behavior and Operating Characteristics

(1)Mechanical Noise: <45dB
(2)Output Characteristics: No-load output Voltage varies directly with the rotating speed
(3)Ratio of Speed: 1:23
(4)Weight (Approximate): 49g

3. Dimension: 50mm(L)X33mm(W)X30mm(H)

4. Configuration is below:

Hand crank charger parts of yingyidg

-Environmental protection
-No battery required
-Generating electricity by hand cranking
-Energy saving
-High efficient
industrial magnetic charger Application :

1)hand operated charger,emergency power box,hand operated torch,cellphone charger,etc..

2) function:Mountain climbing and hiking, camping such outdoor sports; Blackouts, earthquake, flood, etc, to provide reliable lack electricity moments of illumination; Night broke down car, readily available

3)usage: The open hand behind the switch, hand put will automatically pop up, with one hand back and forth ease pressure to put, can send immediately

4)parts are produced according to customer's drawing and sample

5)the high quality , energy -saving and competitive price

6)delivery date is subject to customer final confirmation

7) appearance: Bright surface gloss and attractive designs

8)merit:Environmental protection, energy saving, lighting, hand pressure power generation.Powered by batteries or be hand-pressure power generation

9) If you want to get more detailed information , please contact me directly or welcome to visit
our website:
http://dgyingyi.en.alibaba.com

Hebei-Green 300-5000W hybrid solar wind power generator

hybrid solar wind power generator
solar wind street light
solar street light
manufacturer
CE,RoHS,IEC,ISO certifications
hybrid solar wind power generator
solar wind street light
solar street light
manufacturer
CE,RoHS,IEC,ISO certifications

Hebei Green Photoelectric Technology Co., Ltd. is a large professional producing LED street lamps manufacture.
1.Specification
E40,28W
GLC- LD01,28W,40W,48W,56W,
GLC- LD02,80W,96W,112W,
GLC- LD03,120W,144W,168W,
GLC- LD04,192W.
2.Features
Air Convection Integrated Cavity Style Aluminum Radiator for working temperature safely under 50.
Metal Bolt High Power LED Light Source make sure 60000h life.
Many kinds of color temperatures to choose.
Secondary optical lens module and zonal facula reduce the light loss.
Output accurate constant current be harmless to human.
Customized the appearance of different colors.
All kinds of different power light depending on the width of the road.

3.LED street lamp
High efficacy, waterproof,long lifetime, good color rendering, stable output, low loss etc.
4.Applications
Freeway, highway, paking lots, public entrances, off street areas.

Product Specifications
Model
GLC-LD01
GLC-LD02
GLC-LD03
Specifications
558×285×80(mm)
709×285×80(mm)
860×285×80(mm)
Net Weight
6.9kg
9kg
10kg
LED Total Power
40W
48W
56W
80W
96W
112W
120W
144W
168W
Input Total Power
44W
52W
64W
92W
110W
131W
134W
166W
196W
Illuminance(LUX) Vertical
6m
20.5
23
28
42.6
52




8m
11
13.2
16
23.5
26
34
37.3
44.5
54
10m
7
7.5
11
14.5
16
22
23
25.5
35
12m



12
14.3
15
16
186.4
22
14m





13
13.5
16.4
18
Luminous Flux(lm)
3232
3880
4525
6218
7461
8705
9068
10882
12696
Illuminated Area
6 meters26×12


8meters36×14

10meters42×16


12meters48×18

Input Voltage
AC84V-264VDC9V-30V
Illuminance uniformity
>0.6
Power efficiency
≥92%
Current
Single 325mA
LEDSingle Power
1W
Color Temperature
3000K4500KWarm white,5500K-6500K(white)
LEDSingle efficiency
≥90LM/W
Lamp Temperature
<50
Idemitsu Perspective
Horizontal140Vertical77
Efficiency
>90%
Power Factor
0.99
Protection Grade
IP65
Facula Shape
ZosterFacula

Hebei-Green Solar wind energy systems and parts

wind energy systems
solar generator components for renewable energy power
solar and wind hybrid power system
solar wind
wind
wind energy systems
solar generator components for renewable energy power
solar and wind hybrid power system
solar wind hybrid power supply system
manufacturer,IP65
CE,RoHS,IEC,ISO
This is
Hebei Green Photoelectric Technology Co.,Ltd
.
We are a large prefessional manufacturer in China.
We mainly produce
wind and solar led street light
.
Well,let me introduce:
1.E40 28W
2.GLC-LD01(Two modules) 28W,40W,48W,56W
3.GLC-LD02(Four modules) 80W,96W,112W
4.GLC-LD03(Six modules) 120W,144W,168W
5.GLC-LD04(Eight modules) 192W
Products specs.
Product Specifications
Model
GLC-LD01
GLC-LD02
GLC-LD03
Specifications
558×285×80(mm)
709×285×80(mm)
860×285×80(mm)
Net Weight
6.9kg
9kg
10kg
LED Total Power
40W
48W
56W
80W
96W
112W
120W
144W
168W
Input Total Power
44W
52W
64W
92W
110W
131W
134W
166W
196W
Illuminance(LUX) Vertical
6m
20.5
23
28
42.6
52




8m
11
13.2
16
23.5
26
34
37.3
44.5
54
10m
7
7.5
11
14.5
16
22
23
25.5
35
12m



12
14.3
15
16
186.4
22
14m





13
13.5
16.4
18
Luminous Flux(lm)
3232
3880
4525
6218
7461
8705
9068
10882
12696
Illuminated Area
6 meters26×12


8meters36×14

10meters42×16


12meters48×18

Input Voltage
AC84V-264VDC9V-30V
Illuminance uniformity
>0.6
Power efficiency
≥92%
Current
Single 325mA
LEDSingle Power
1W
Color Temperature
3000K4500KWarm white,5500K-6500K(white)
LEDSingle efficiency
≥90LM/W
Lamp Temperature
<50
Idemitsu Perspective
Horizontal140Vertical77
Efficiency
>90%
Power Factor
0.99
Protection Grade
IP65
Facula Shape
ZosterFacula
Sincerely hope to cooperate!
Sunny

10kw fiberglass wind turbine blades with VARTM technique

1. Factory direct sales
2. GFRP/ Bamboo plus GFRP
3. Top quality, moderate price
4. VARTM Tec
5. turbine blades
Shanghai Good Serve Group (
“SGSG”
) is a China professional wind blades manufacturer. We are specialized in produce all kinds of wind blades for small wind turbines below 100kw. All SGSG’s wind blades conform to CE and ISO9001 quality standards.

Our Wind turbine blades Parameters

Model No.
Rated Power
(W)
Technique
Main Material
Net Weight (Kg)
Net Length (m)
Start wind
Speed
(m/s)
Cut out wind Speed
(m/s)
Survive wind Speed
(m/s)
1
1.5-2K
VARTM
GFRP
5.5
1.53
2
16~25
50
2
5K
VARTM
GFRP
23.5
3.1
2.5
16~25
50
3
10K
VARTM
GFRP
32
4
2.5
16~25
50
4
30K
VARTM
GFRP
74.5
6
2.5
16~25
50

What kinds of wind blades that SGSG is manufacturing now?
1.
Wind blades made by
bamboo plus GFRP ( new type * )

Wind blades made by GFRP
*
SGSG wind blades made by Bamboo plus GFRP
are our new research and developed blades, research figures show that
bamboo plus GFRP wind blades are the best scenario
compared with traditional aluminum, Steel
(
43#
)
, Carbon Fiber, Wood (Finland birch),GFRP wind blades.
(We have detail test statistic figures, for details, please contact with us directly.)
SGSG wind blades features:
Designed life is over 15 Years.
SGSG wind blades are adopted VARTM techniques.
SGSG Wind blades are very popular to famous wind turbine factories in china.
SGSG’ wind blades have been installed very well in Europe, North America, Australia and etc.
SGSG wind blades are low noise, low start-up wind speed (2m/s~2.5m/s), light weight, high efficiency and very easy for installation. Furthermore, their fatigue resistances are very strong as well.
The prices of SGSG wind blades are moderate, because the materials of SGSG wind blades are all top quality, e.g. Ashland Resin, PPG gel coat, DSMN adhesive, top quality China bamboo for wind blades and etc.
What we can do for you?
The 1
st
minute feedback/service for you once your inquiry arrived!
Accept to manufacture any size of wind blade according to your detail request, including:
We provide SGSG wind blades category to you, you choose and place order, and/or
You provide us drawings, SGSG manufacture for you as to drawings and and/or
You provide us your physical sample, SGSG manufacture for you as to sample and/or
You inform us your wind turbine parameters, we design specialized for you, and/or
We design new blades type and manufacturing for you according to your personalized requirement.
We provide wind blades technology management consulting for you.
What’s the target of SGSG?
There is
ONE and only ONE
target, which is---make all of our customers 100% satisfied.

With the efforts of whole employees, GSG has built up good visualize in small wind turbine industry all over the world. The rate of market occupancy is steadily increasing.





wind blade
wind blades
wind power blade
wind power blades
wind turbine blade
wind turbine blades
wind turbine rotor blade
wind turbine rotor blade
wind turbine generator blades
wind driven generator blades
wind driven generator blade
generator
wind turbine
wind generator
generator set
power generator

Helical wind generator FDV-1000W

Helical wind generator FDV-1000W
1.CE /ISO9001certified
2.Easy to install and easy to use
3.Low maintenance costs
Helical wind generator FDV-1000W

Parameter
Rated power
1,000W
Max power
1,200W
Output voltage
48
Rated wind speed
7-8m/s
Rotor diameter
1.4m
Blade material
FRP
Swept area
4.5m2
Start-up wind speed
2m/s
Work wind speed
2-24m/s
Rotation speed
150r/min
Number of blades
5
Turbine weight
78kg
Tower height
6m
Tower type
Steel (Q235B)
Suggested battery type
12v100AH 4pcs
Service life
20-25 years

Our FDV-1,000 watt vertical wind turbine can supply power for charging stations, water pumps (285W and under), TV, washing machines, electric fans, lighting and other household appliances.

High Efficience Wind Generator 5KW

Wind Generator
High Efficiency
CE / GS Approved
Model
LKW-5000W
Rated powerW
5000
Rated voltageV
240
Rotor diameterm
6.4
Start-up wind speedm/s
2.5
Rated wind speedm/s
10
Security wind speedm/s
45
Rated rotating speedr/m
200
Blade material
FRP
Blade quantity
3
Guy cable tower
Tower heightm
12
Tower diametermm
270

High Efficiency : Pelton Hydro/ Water Turbine

1)Precisely Designed
2)Strictly According To The Quality Control System
3)Favorable Prices
4)Delivery on time
Emeishan Chicheng Machinery Co., Ltd

Used for laege & medium power plants with a water head of 420-520m ,driving the rotation of water turbine generator for power generation.Chicheng products are well sold to many provinces and regions in China and to India,Nepal and other countries.

Techenical specifications:


Pictrues :

1.Runner :





2. Turbine:




3. Acceptance:





4. Welcome to our factory:

High Efficiency Horizontal Axis Wind Turbine Generator

Wind Turbine Generator
1.Breeze start up,high efficiency
2.Long life time,maintenance free
3.Heavy wind resist,anti-rust
High Efficiency Horizontal Axis Wind Turbine Generator
Features of wind turbine generator

1. Start up in breeze, high efficiency in generating, suitable for low wind speed area.
2. Strong neodymium permanent magnet PMA. The generator is compact, high reliable, light weight and easy to be installed.
3. The blade with aerodynamic design is heavy wind resistance, low noise and small vibration.
4. Anti-rust, anti-corrosion, pass 500-hour salt spray test.
5. Labyrinth generator design, moisture-proof, water-proof, sandstorm-proof.
6. Designed as full automatic.
7. Electromagnetic speed limitation and blade over speed braking.
8. 15 years maintenance-free wind turbine service life.
Parameter of wind turbine generator
Rated power (W)
600
Maximum power(W)
750
Rotor diameter (M)
1.7
Motor
3 phases PMA
Working wind speed (M/S)
3-30
Rated voltage (V)
DC24/48
Start-up wind speed (M/S)
2
Blades material*quantity
Fiberglass-Reinforced +nylon *
3
Cut-in wind speed (M/S)
2.5
Tower height (M)
8-12m
Survival wind speed (M/S)
60
Main machine weight (KG)
23
Rated wind speed (M/S)
12
Speed-limitation mechanism
Electromagnetic speed limitation + blade over-speed braking
Remark
HY-600 is designed as full automatic, normally working for 15 years free of maintenance

High Efficiency Hummer samll 500W wind generator

500w wind generator
-PLC control system
-touch screen for remote control
-low noise with SKF bearings
-smart yawshaft
High Efficiency Hummer samll 500W wind generator
Hummer 500w wind power generator is the smallest one in production at present .

It gives you a clear look how small Hummer wind power generator is ,which is able to be placed inside nose cone .

Though very small , compared with traditional turbine ,its stronger power making ability has won Hummer's reputation in market .

Refined material ,strong structure and mature techniques ensure its toughness in wild filed .

Due to its small size and light weight ,thus easy to carry ,it is a favor to people who often travel ,places that do not require high power supply ,like observation site ,military post and TV transmission station .


The main technical of 500w wind power generator is :
Rated power(W)
500
Maximum output power(W)
1000
Charging voltage (V)
DC 24
Blade quantity
3
Blade material
GRP
Blade diameter(m)
2.7
Start-up wind speed (m/s)
3.0
Rated wind speed (m/s)
7.0
Rated rotating rate (r/min)
600
Wind energy utilizing ratio (Cp)
0.48
Generator output
Single-phase frequency conversion AC
Output AC frequency (Hz)
0~300
Rated charging current (A)
16.7
The maximum charging current (in a short time )(A)
25
Generator efficiency
>0.78
Tower diameter(mm)
76*2000*3 (3pcs)
Tower height(m)
6
Generator weight (kg)
6.5
Battery 12V 150Ah/200Ah
2pcs

High Efficiency Hummer samll 500W wind turbine

turbine500w wind generator
-PLC control system
-touch screen for remote control
-low noise with SKF bearings
-smart yawshaf
High Efficiency Hummer samll 500W wind turbine
Hummer 500w wind power generator is the smallest one in production at present .

It gives you a clear look how small Hummer wind power generator is ,which is able to be placed inside nose cone .

Though very small , compared with traditional turbine ,its stronger power making ability has won Hummer's reputation in market .

Refined material ,strong structure and mature techniques ensure its toughness in wild filed .

Due to its small size and light weight ,thus easy to carry ,it is a favor to people who often travel ,places that do not require high power supply ,like observation site ,military post and TV transmission station .


The main technical of 500w wind power generator is :
Rated power(W)
500
Maximum output power(W)
1000
Charging voltage (V)
DC 24
Blade quantity
3
Blade material
GRP
Blade diameter(m)
2.7
Start-up wind speed (m/s)
3.0
Rated wind speed (m/s)
7.0
Rated rotating rate (r/min)
600
Wind energy utilizing ratio (Cp)
0.48
Generator output
Single-phase frequency conversion AC
Output AC frequency (Hz)
0~300
Rated charging current (A)
16.7
The maximum charging current (in a short time )(A)
25
Generator efficiency
>0.78
Tower diameter(mm)
76*2000*3 (3pcs)
Tower height(m)
6
Generator weight (kg)
6.5
Battery 12V 150Ah/200Ah
2pcs

High Efficiency Wind Turbine Generator

High Efficiency Wind Turbine Generator
1.Down Wind
2.Enclosed Slip Ring
3.Maintenance Free
4.CE
High Efficiency Wind Turbine Generator
Parameters of wind turbine generator
Rated power (kw)
5
Maximum power(KW)
5.4
Rated wind speed (m/s)
11
Speed regulation method
Adjustable-Pitch
Startup wind speed (m/s)
3
Generator style
3-phase AC PM
Working wind speed (m/s)
4-25
Tower height (m)
8
Survived wind speed (m/s)
50
Stop method
Backswept pitch
Rated rotate speed(r/min)
240
Main machine weight (kg)
340
Rotor diameter(m)
5.6
Guyed tower weight(kg)
350
Working voltage (v)
DC240V/AC220V
Free standing tower weight(kg)
650
Blades material*quantity
Fiberglass-Reinforced plastics*3
Annual generation Min/Max(kwh)
7500/22500

Characteristics of wind turbine generator
1. Wind turbine body is made of cast steel and has been hot dipped galvanized for anticorrosion protection.
2. The blades of wind turbine are made of special purpose gel coat resin and reinforced FRP.
3. The tower of wind turbine is made of manganese steel, corrosion resistant, artistic, and convenient for installation.
4. All of the exposed components have experienced a long effecting anti-corrosion treatment protecting the exposed parts in open pit.
5. Downwind and tail-less configuration contribute to a streamlined shape.
6. Variable blade pitch to enhance the stability under strong wind.
7. Enclosed slip ring functions well to prevent the inter-entangling of cable.
8. Permanent magnet and direct driven motor with maintenance free.
9. Soft braking due to positive blade pitch.
10. Optimized start up blade angle makes the turbine with excellent efficiency in the breeze.
11. The blade profile has passed the national wind tunnel test.
12. Warranty:2 years.
Wind turbine generator output power curve
Wind speed (m/s)
0
1
2
3
4
5
6
7
8
9
10
11
12
Output power (kW)
0
0
0
0.01
0.26
0.76
1.32
2.01
2.75
3.87
4.65
5.3
5.36
Wind speed (m/s)
13
14
15
16
17
18
19
20
21
22
23
24
25
Output power (kW)
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4

High Efficiency Wind turbine generator for home use

High efficient wind generator
1 Small& light structure
2 High power efficiency
3 Reliable and durability
4 CE certificate
High efficient wind turbine generator 500W.
Please see following technical parameters:

1. Model: FD2.8-0.5/8

2. Rated power:500W

3. Rated wind speed:8m/s

4. Starting wind speed:2m/s

5. Working wind speed:3-20m/s

6. Survived wind speed:35m/s

7. Rated rotate speed:480r/min

8. Rotor Diameter:2.8m

9. Rated voltage:DC28.

10. Blade material: fiber glass.

11. Speed regulation method: mechanical yawing+ electromagnetic brake

Applications:

Small air conditioner,
Small refrigerator,
Washer, water pump,
Electric cooker,
Color TV, lighting,
Electric fan and battery charging, etc..





If you want more information about our company please visit our web at
effsun.en.alibaba.com
or feel free to email us and please provide me your contact details and I will be happy to give you a call.
Hope we could have a good relationship!
----------------------------------------------------------------------------------------
Make Everyone Enjoy Clean Energy!

High Frequency Transformer aluminum wire suppliers

aluminum wire suppliers
1.Size:0.2-8.0mm
2.Thermal Class: 130-220C
3.Standard: IEC, NEMA,GB
4.aluminum wire suppliers
High Frequency Transformer aluminum wire suppliers

1.Specifications of
aluminum wire
:
Diameter:0.2mm-8.0mm
Standard: IEC, NEMA,GB
Thermal Class: 130/155/180/220 centigrade
Certification:SGS,UL Approved,iso9001,iso14001
2.Features of
aluminum wire
:
a) Excellent resistance to abrasion and solvent,
b) excellent electricity performance
c) Excellent heat shock, adherence and flexibility,
d) high cut through
3.Main Applications of
aluminum wire
:
This kind of polyurethane enameled aluminum wire can be used to make winding wire demanding light material, high electricity conductivity and good heat dispersing performance, especially for the winding wire for transferring high frequency signal, such household appliances as degaussing coil, high frequency transformer, common transformer and small electric motor
4.Packing of
aluminum wire
:
plastic spool,wooden spool and also can pack the goods according to the requirement of each client
5.Delivery time:
10days-30days




Details Tech Information:
Name
Enameled Aluminum Wire
Type
QZXYL-2/180
Diameter
4.6mm
Standard
IEC60317-15
Test Item
Unit
Technical Requirement
Test Result
Appearance

bright and clean, Uniform color,
Ok
Overall Diameter
mm
<4.737
4.735
Conductor Diameter
mm
±0.046
4.608
Thickness of insulation film
mm
>0.093
0.127
resistance
Ω/m
<0.001730
0.001509
Elongation

>15%
26%
winding test

3DWinding, no cracking
no cracking
Tensile Test

Tensing No cracking
no cracking
Peel twist

insulation film Without losing adhesion
Ok
Jerk test

insulation film Without losing adhesion
Ok
Resistance to heat shock
C
200C insulation film no cracking
3D half an hour, no cracking
Resistance to solvent

Standard solvent “H” Pencil
2H is oK
Breakdown Voltage
KV
2.5 KV
7.6,7.0,8.1,6.9,7.9
package

Meet the export standards
Ok
Quality Control Result

Ok


About factory:
ZHENGZHOU LP INDUSTRY CO.,LTD
Established in 1993, has developed a professional manufacturer of Magnet Wires in China.
Products Scope:
our company produce various magnet wire, including Enameled Aluminum Wire, Enameled Flat Aluminum Wire, Enameled Copper Wire, Enameled Flat Copper Wire, Bare Aluminum Wire, Paper-Wrapped wire, NOMEX Paper Covered Wire, Fiber Glass Covered Wire and so on .

High Grade: Pelton Hydro/ Water Turbine

1)Delivery on time
2)Produced Strictly According To The Quality Control System
3)Favorable Prices
4)Precisely Designed
Emeishan Chicheng Machinery Co., Ltd

Used for laege & medium power plants with a water head of 420-520m ,driving the rotation of water turbine generator for power generation.Chicheng products are well sold to many provinces and regions in China and to India,Nepal and other countries.

Techenical specifications:


Pictrues :

1.Runner :





2. Turbine:





3. Acceptance:





4. Welcome to our factory:

10kw generator

1.three phase wind alternator
2.Magnet material.
3.Lowsetup torque.
4.Reasonable structure.
5.Efficient,easily installed.
10kw generator
500w three phase wind alternator
Products Advantages:
A. All of our products conform to CE and ISO9001 quality standards.
B, 3 phase low speed permanent magnet generator.
C. Small& light structure Low start-up wind speed.
D. reasonable configuration, reliable quality,beautiful design,installation is convenient.

Below technical details is for your reference.
10kw generator parameters
Model
TFY10-360-200
Rated power(W)
10000
Rated voltage(V)
DC360
Rated rotation (rpm)
200
Starting torque (N*M)
7
Shell Material
Precision steel
Certificate
CE,RoHS,ISO9001:2000

If you have questions about three phase wind alternator model or you are interested in other models, please
call us
or
send email directly
.We will happy to reply you any of your questions.

Welcome to choose our products!
Hope we could have a good relationship!

--------------------------------------------------------------------------------------------
Make Everyone Enjoy Clean Energy!

High Performance 50HZ 4KW open gasoline generator with CE&amp;EPA

1)Environment-friendly Design
2)CE&EPA certificate
3)Low Fuel Consumption
4)High Quality Electricity
5)Good service
High Performance 50HZ 4KW open gasoline generator with CE&EPA

Specification:


Generating
KG6000E
Frequency
50 HZ
60 HZ
Max. AC output
4.5 KVA
5.5 KVA
Rated AC output
4.0 KVA
5.0 KVA
Phase
Sigle phase
Insulation
F
Rated AC voltage
115/230.220.230.240/110.120.110/220.120/240

Engine

Model
FG182
Engine Type
Air-cooled,4stroke,OHV,single cylinder
Max power output
11.0HP
Displacement
340cc
Compressin ratio
8.0: 1
Engine speed
3000rpm
3600rpm
Starting system
Recoil or Electric
Fuel tank capacity
25L
Noise level(at 7m)
80db(A)
N.W/G.W
95/ 100KG
Packing Dimension
710 x550 x 570 mm

All of our machines are silent type with very low noise, air-cooled engine, energy saving, creative and
environmental protection, It is widely used in everydaylife, such as stores, factories, hospitals, boat, etc..
What is more important, we can design the generator sets according to the demand of clients.
Besides, we can provide OEM service.

High Power Wind Turbine Generator, Wind Generation 100W 200W 300W

Wind Turbine Generator 200W
Wind Generation Three-phase
2m/s start wind
Electromagnetic/wind round laterlization
CE RoHS
High Power Wind Turbine Generator
Wind Generation 100W 200W 300W

Model No.: NE-200S

Technical Specifications:
Model
NE-100S
NE-200S
NE-300S
Rated power
100W
200W
300W
Maximum power
130W
230W
330W
Nominal voltage
12/24V
12/24V
12/24V
Start wind speed
2.0m / s
2.0m / s
2.0m / s
Rated wind speed
10m / s
10m / s
11m / s
Rated revolution
400r / m
400r / m
450r / m
Security wind speed
65m / s
60 m / s
55m / s
Host Net
6.0kg
6.2 kg
6.5kg
Wind wheel diameter
1.2 m
1.3 m
1.3 m
Leaf number
3
Blade material
Nylon fiber
Generator
Three-phase permanet magnet synchronous generator
Controller system
Electromagnetic/wind round laterlization
Speed way
Automatically adjust the windward angle
Lubrication
Lubrication
Temperature
-40 °C -80 °C
Cut in torque
0.3
0.35
0.5
FOBshanghai
$220
$245
$258

Features:
1, starting with low wind speed, wind energy utilization high; small size,
beautiful appearance, low vibrating operation.
2,Installed by human design, easy installation, maintenance and repair.
3,the wind turbine blade by using new technology precision injection molding,
together with the aerodynamic design and optimization of structural design,
wind energy utilization coefficient is high, an increase in generating capacity.
4,permanent magnet generator rotor using patented alternator, together with the special stator design,
effectively reduce the generation of resistance torque,
while allowing more wind turbines and generator has good matching characteristics, the unit runs reliability.

High Power Wind Turbine Generator, Wind Generation 100W 200W 300W

Wind Turbine Generator 300W
Wind Generation Three-phase
2m/s start wind
Electromagnetic/wind round laterlization
CE RoHS
High Power Wind Turbine Generator
Wind Generation 100W 200W 300W

Model No.: NE-300S

Technical Specifications:
Model
NE-100S
NE-200S
NE-300S
Rated power
100W
200W
300W
Maximum power
130W
230W
330W
Nominal voltage
12/24V
12/24V
12/24V
Start wind speed
2.0m / s
2.0m / s
2.0m / s
Rated wind speed
10m / s
10m / s
11m / s
Rated revolution
400r / m
400r / m
450r / m
Security wind speed
65m / s
60 m / s
55m / s
Host Net
6.0kg
6.2 kg
6.5kg
Wind wheel diameter
1.2 m
1.3 m
1.3 m
Leaf number
3
Blade material
Nylon fiber
Generator
Three-phase permanet magnet synchronous generator
Controller system
Electromagnetic/wind round laterlization
Speed way
Automatically adjust the windward angle
Lubrication
Lubrication
Temperature
-40 °C -80 °C
Cut in torque
0.3
0.35
0.5
FOBshanghai
$220
$245
$258

Features:
1, starting with low wind speed, wind energy utilization high; small size,
beautiful appearance, low vibrating operation.
2,Installed by human design, easy installation, maintenance and repair.
3,the wind turbine blade by using new technology precision injection molding,
together with the aerodynamic design and optimization of structural design,
wind energy utilization coefficient is high, an increase in generating capacity.
4,permanent magnet generator rotor using patented alternator, together with the special stator design,
effectively reduce the generation of resistance torque,
while allowing more wind turbines and generator has good matching characteristics, the unit runs reliability.

High Pressure Diaphragm Accumulator

Appliance Diaphragm accumulator in hydraulic system
Volume:0.75L to 3.5L
Working pressures: 250 bar
Gas valve: M28X1.5
Compact, light weight ,economical design. These hydro-pneumatic accumulators are constructed of two forged steel hemispherical sections welded together by a hi-tech electron beam welding process. This assures the customer a strong, safe and reliable design.
In many hydraulic systems there is the need to either store energy, compensate fluid level changes or absorb shock. In order for the accumulator to function properly, a high compressible medium (Nitrogen) and a non compressible medium (Hydraulic fluid) are separated by a rubber diaphragm.
Nominal Volume :0.1L,0.25L,0.35L,0,5L,0.75L,1.0L,1.4L,2.0L,3.0L,4.0L
Working Pressure : 100 to 250 bar
Precharge : Nitrogen Gas
Port conection size:SAE #8 3/4-16 (D) or special custom
Shell - high strength alloy steel
Ports - Steel
Button - Steel
Gas Valve Stem - Steel
Diaphragms material- NBR
ECO
IIR
TT-NBR
FKM

High Quality 10KW-pitch wind turbine generator

10kw-pitch wind turbine with adjustable pitch
1.CE certification
2.two years warranty
3.Maintenance free
4.MOQ: 1 set
10KW-pitch wind turbine generator

Feature:
1.wind turbine with adjustable pitch
2.CE certification
3.two years warranty
4.Maintenance free
5.MOQ: 1 set Low start up

Parameter:

Rated power (kw)
10
Maximum power(KW)
12.5
Rated wind speed (m/s)
11
Speed regulation method
Passive pitch
Startup wind speed (m/s)
3
Generator style
3-phase AC PM
Working wind speed (m/s)
4-25
Tower height (m)
10
Survived wind speed (m/s)
50
Stop method
Passive pitch
Rated rotate speed(r/min)
200
Main machine weight (kg)
500
Rotor diameter(m)
7.2
Lattice tower weight(kg)
500
Working voltage (v)
DC300V/AC380V
Free standing tower weight(kg)
900
Blades material*quantity
Fiberglass-Reinforced plastics*3
Annual generation Min/Max(kwh)
10000/30000

High Quality 5KW horizontal pitch Wind Turbine Generator

1. Maximum power (kW): 5.4
2. Startup wind speed (m/s): 3
3. CE&ROHS Certified
4. Speed regulation method: Passive pitch


5kW Wind Turbine
Characteristics
1. Wind turbine body is made of cast steel and has been hot dipped galvanized for anticorrosion
protection.

2. The blades of wind turbine are made of special purpose gel coat resin and reinforced FRP.

3. The tower of wind turbine is made of manganese steel, corrosion resistant, artistic, and
convenient for installation.

4. All of the exposed components have experienced a long effecting anti-corrosion treatment
protecting the exposed parts in open pit.

5. Downwind and tail-less configuration contribute to a streamlined shape.

6. Variable blade pitch to enhance the stability under strong wind.

7. Enclosed slip ring functions well to prevent the inter-entangling of cable.

8. Permanent magnet and direct driven motor with maintenance free.

9. Soft braking due to positive blade pitch.

10. Optimized start up blade angle makes the turbine with excellent efficiency in the breeze.

11. The blade profile has passed the national wind tunnel test.

12. Warranty:2 years.


Parameter
Rated power (kW)
5
Maximum power (kW)
5.4
Rated wind speed (m/s)
11
Speed regulation method
Adjustable-Pitch
Startup wind speed (m/s)
3
Generator style
3-phase AC PM
Working wind speed (m/s)
4-25
Tower height (m)
8
Survived wind speed (m/s)
50
Stop method
Backswept pitch
Rated rotate speed (r/min)
240
Main machine weight (kg)
340
Rotor diameter (m)
5.6
Guyed tower weight (kg)
350
Working voltage (V)
DC240/AC220
Free standing tower weight (kg)
650
Blades material*quantity
Fiberglass-Reinforced plastics*3
Annual generation Min/Max (kWh)
7500/22500

High Quality HAWT 30KW Horizontal Axis Wind Turbine Generator

Wind Turbine Generator
1. Rated Power:30KW
2. Rated wind speed(m/s):12M/S
3. Aerodynamic brake.
4. Pitch controlled
High Quality HAWT 30KW Horizontal Axis Wind Turbine Generator
Parameters of wind turbine generator
Rated power(KW)
30
Material of the blades
Fiberglass-Reinforced Plastics
Rated wind speed(m/s)
12
Speed regulation method
Passive pitch
Startup wind speed(m/s)
3
Generator style
3-phase AC PM
Working wind speed(m/s)
4~25
Tower height (m)
15
Survived wind speed(m/s)
50
Stop method
Positive blade pitch
Rated rotate speed (r/min)
120
Main machine weight(kg)
1770
Rotor Diameter(m)
11
Lattice tower weight(kg)
3200
Working voltage(v)
DC540V/AC380
Freestanding tower weight (kg)
3770
Characteristics of wind turbine generator
1. Wind turbine body is made of cast steel and has been hot dipped galvanized for anticorrosion protection.
2. The blades of wind turbine are made of special purpose gel coat resin and reinforced FRP.
3. The tower of wind turbine is made of manganese steel, corrosion resistant, artistic, and convenient for installation.
4. All of the exposed components have experienced a long effecting anti-corrosion treatment protecting the exposed parts in open pit.
5. Downwind and tail-less configuration contribute to a streamlined shape.
6. Variable blade pitch to enhance the stability under strong wind.
7. Enclosed slip ring functions well to prevent the inter-entangling of cable.
8. Permanent magnet and direct driven motor with maintenance free.
9. Soft braking due to positive blade pitch.
10. Optimized start up blade angle makes the turbine with excellent efficiency in the breeze.
11. The blade profile has passed the national wind tunnel test.
12. Warranty:2 years.

High conversion wind turbine

High conversion wind turbine
1 30% more electricity generated.
2 Aerodynamic brake
3 Maintenance free
4 Low start-up speed
High conversion wind turbine
Advntages of Anern Wind Turbine:
Longer service life up to 25 years;
Smaller vibration and tiny friction;
Lighter in weight and smaller in size;
5-blade design allows lower startup wind speed

AN-FD-1KW Technical Parameters
:
Rated Output Power
1000W
Rated Wind Speed
9m/s
Startup Wind Speed
2m/s
Cut-in Wind Speed
2.5m/s
Safety Wind Speed
50m/s
Rated Output Voltage
24V/48V
Rated Rotary
450r/m
Generator Type
Brushless NdFeB Permanent-Magnet Generator
Overspeed Protection
Electromagnetic Torque Control
Net/Gross Weight
25KGS/29KGS
Packing Dimension
125x52x24cm

Features of 1KW wind turbine:
1. Optimum aerodynamic shape design: high efficiency lower noise
2. Centrifugal pitch controlled mechanism: 2m/s low wind speed start up, 3-12m/s wind speed, following wind rotor rate speed to adjust blade angle at optimum TSR, run in high efficiency.
3. Permanent magnet generator, lower start up resistance moment constant running ability of over loading 1.5 times.
4. Safety controller: mechanical brake, manual stop mechanism.
5. Alloy steel tail. no corrosion in 15 years.
6. Slipping device inside the generator, which can fully avoid the cable winding or cutting or cutting problem, the wind turbine tailer can swing freely and change direction usually, but the turning direction is always in anti-clock wise direction.


Update Date:2011-10-25 20:13:12

High efficiency 1000W wind generator CE certificate

1000W wind generator
--PLC control system
-touch screen for remote control
-low noise with SKF bearings
-smart yawshaft

1000W wind generator

Application of

Model H3.1-1000W
It can drive air-condition ( ≤20 horsepower), 6kw water pump or other resistive appliances (≤20KW).
Well used in:
Housing and factory and farm
Telecommunication Station
TV Transfer Station
Monitoring Station (military, hydrology, observatory)
Water-pumping Station
shipping
Rated power(W)
1000
Maximum output powerW
2000
Charging voltage(V)
DC 60
Blade quantity
3
Rotor blade material
GRP
Rotor blade diameterm
3.1
Start-up wind speed (m/s)
3.0
Rated wind speed (m/s)
9.0
Rated rotating rate (r/min)
500
Wind energy utilizing ratio (Cp)
0.45
Generator output
Single-phase frequency conversion AC
Output AC frequency (Hz)
0~400
Rated charging current (A)
15
The maximum charging current (in a short time )(A)
30
Generator efficiency
>0.8
Tower diameter(mm)
89*2000*3.5 (4pcs)
Tower height(m)
8
Weight of generator (kg)
15
Battery 12V 150Ah/ 200Ah
5pcs

High efficiency 10KW wind power turbine wind generator system

10KW wind power turbine
--PLC control system
-touch screen for remote control
-low noise with SKF bearings
-smaller,lighter
High efficiency 10KW wind power turbine wind generator system

rated power
10000w
max power
15000w
battery bank voltage VDC
240
system output voltage VAC
380
start up wind speed
3m/s
rated wind speed
10m/s
working wind speed
3-25m/s
survival wind speed
50m/s
generating efficiency
above 0.85
wind energy utilizing ratio
0.4
generator type
PMG
blade material and quantity
GRP/3
speed regulation method
yawing, electromagnetism braking
shutting down method
manual and automatic


1. guy tower, free standing tower, hydraulic tower optional.
2.wind vane and anemometer indicating wind direction and measuring wind speed, transmitting wind signal to PLC controller.
3. yaw shaft with the slip ring to ensure the rotation at 360 circulation.
4.Siemens PLC controller receiving wind signal and operation signal, quick in reaction, reliable and intelligent.
5.rectifier, dump load, inverter seperately equipped.
6.rectifier rectifying and controlling the dumping load.
7. dumping load made of metal box, heat dissipation by air convection, without the fan and the controlling box.
8. off grid inverter adopting SPWM technology, amorphous transformer and high frequency breaker, with high converting efficiency, outputting stable frequency and voltage, filtering out noise, low distortion of pure sine wave.
9. hydraulic brake optional.

1.6kW wind tubine motor

low noise
high efficiency energy output
easy installation,small space required
light weight, maintainence free

Function
Wind Power Supply
In Emergency Case
Standby Power
Tele.Base
Controller,inverter with protection features
Brake(optional)
Electrical,Handle
Unloading protection(wind turbines more than 150% of voltage unloading, and network independent and can have)
Direct Permanent Magnetic Generator
Tech
Specification
Generator
Start Wind Speed
1.8 m/s
Working Wind Speed
2.0 ~35 m/s
Rated Wind Speed
10 m/s
Max. Wind Speed
63 m/s
Wheel
Dia.
2 .6m
Height
2 .2m
No. of Blade
4
Tower Height
6 m
Controller and inverter
Out-put Vol of Generator
36V(220V)
Bus-Bar DC Voltage
48VDC
Out-put Voltage of inverter
110VAC
220(230)VAC
Frequency
50Hz (60Hz)
Packing
Item
Referenced Dimension(mm)
Referenced Weight(kg)
Blade and Connector
2100×800×520
54
Tower
6500×155×103
300
Foundation
1700×600×600
18
Controller
90×385×177
40
Inverter
90×385×177
40

10kw high power solar generator

10kw high power solar generator
1.high efficiency, low consumption
2.green,economical,convenient
3.easy install, safe operate
10kw high power solar generator
solar generator features:
1.This system makes use of solar or wind energy to provide convenient and highly-efficient
clean electric power to households.
2.It’s featured with high-efficiency, easy-installation,
economic and environment-friendly, etc.
3.This system is extensively used for areas without grid-power network, villas, backup power f
or general families.




NOTES:
1. All pictures as shown are for reference.
2. Battery Capacity provides backup for 2-3 continuous days.
3. Wind speed no less than 3.5m/s, sunshine no less than 5 hours per day.
4. Solar panel rack and cables can be supplied as per request.
5. Certificate: CE, ROHS, TUV.


Terms and Conditions:
1. Price: FOB Guangzhou in US Dollar.
2. Payment: Sample: T/T, Paypal in advance.
Order: 30% by T/T, L/C.
3. Delivery Time: 10-25 days depending on order quantity.
4. Packing: carton, standard export package
5. Welcome ODM/OEM, sample order.

Update Date:2011-10-25 20:41:01

High efficiency 2000W Wind Generator

2000W wind generator
--PLC control system
-touch screen for remote control
-low noise with SKF bearings
-smart yawshaft
2000W wind generator

Detailed Product Description
2KW wind power generator
-PLC control system
-touch screen for remote control
-low noise with SKF bearings
-smart yawshaft
New energy 2KW wind generator

Well used in:
Housing and factory and farm
Telecommunication Station
TV Transfer Station
Monitoring Station (military, hydrology, observatory)
Water-pumping Station
shipping

rated power
2000w
max power
3200w
battery bank voltage
120v
blade quantity and material
3 pieces of reinforced fiber glass
start up wind speed
3m/s
rated wind speed
9m/s
rated rotating speed
450rpm
wind energy utilizing ratio
0.45
generaor output
single phase frequency conversion AC
output AC frequency
0--370
rated charging current
15A
max charging current in a short time
28A
generator efficiency
above 0.8
tower specification
diameter 118mm plus 5 segments each 2 meters
suggested battery
200AH/150AH

1. generator located inside nose cone to radiate heat easily, with generator itself extremely light and small, low in noise.
2. yaw shaft with the slip ring to ensure the rotation at 360 circulation.

3. tail ple and tial wing connecting with the body of wind turbine through SKF ball bearing, more endurable and strong.

4. tower made of galvanised steel anti acid proof and salt proof.

5. 3 in 1 inverter integrating the functions of battery charging, inverting, controlling. diversion lights included, a pare te

High efficiency 3KW Wind Turbine Generator

3kw wind generator
1.PLC control system
2.touch screen for remote control
3.low noise SKF bearings
4.CE and UL certificate
3kw wind generator
Main technical data
Rated power (W)
3000
Maximum output power (W)
4500
Charging voltage (V)
DC 180
Blade quantity
3
Rotor blade material
GRP
Rotor blade diameter (ft.)
16 (4.8m)
Start-up wind speed (mph)
6 (2.5m/s)
Rated wind speed (mph)
22 (10.0m/s)
Rated rotating rate (r/min)
265
Wind energy utilizing ratio (Cp)
0.4
Generator output
Frequency conversion AC
Rated charging current (A)
16.7
The maximum charging current (in a short time)(A)
28
Output AC frequency (Hz)
0~360
Generator efficiency
>0.8
Wireless tower diameter (in.)
Ø 15.6*Ø 5.4 (Ø
397*Ø137mm) (2pcs)
Guy tower diameter (in.)
Ø5.5*118.1*0.2 (Ø
140*3000*4mm) (4pcs)
Tower height (ft.)
39 (12m)
The weight of generator (lb)
132 (60kg)
Suggested Battery (Ah)
200/300




















1. rated power 3000w
2. max power 4500w
3. battery bank voltage 180v
4. yaw shaft with the power supply and gearbox inside, controlling the operation of wind generator
5. nose cone made of reinforced aluminum alloy, antisepsis casting
6. wind vane and anemometer indicating wind direction and measuring wind speed. transmitting wind signal to PLC controller.
7. tower made of galvanised steel , salt and acid proof, UV-proof.
8. off grid inverter integrating the functions of battery charging, inverting, and controlling, a spare terminal of solar panel on the back.
9. grid tied inverter adopting MPPT and IGBT technologies, with high power generating capacity, wide AC voltage range.
10. Siemens PLC controller receiving windsignal and operation signal, quick response and reaction, reliable and intelligent control.
11. hydraulic brake: brake block assembled in the flange of wind generator for hydraulic braking.
12. rectifier, dumping load, inverter seperately equipped.

High efficiency HAWT 5KW wind turbine with CE certificate

5kw wind turbine
1.PLC control system
2.touch screen for remote control
3.Low noise with SKF bearings
4.CE certificate

5KW wind turbine
horizontal wind generator in best quality

It can drive air-condition (3-5 horsepower), 1.7KW water pump or other resistive appliances (≤5KW).
Well used in:
Housing and factory and farmTelecommunication StationTV Transfer StationMonitoring Station (military, hydrology, observatory)Water-pumping Stationshipping
Main technical data
Rated power (W)
5000
Maximum output power (W)
7500
Charging voltage (V)
DC 240
Blade quantity
3
Rotor blade material
GRP
Rotor blade diameter (ft.)
21 (6.4m)
Start-up wind speed (mph)
6 (2.5m/s)
Rated wind speed (mph)
22 (10.0m/s)
Rated rotating rate (r/min)
240
Wind energy utilizing ratio (Cp)
0.4
Generator output
Frequency conversion AC
Rated charging current (A)
20.8
The maximum charging current (in a short time) (A)
32
Output AC frequency (Hz)
0~360
Generator efficiency
>0.8
Free standing tower diameter (in.)
19.5*7.3
(495*185mm) (2pcs)
Guy tower diameter(in.)
8.7*78.7*0.2 (220*3000*6mm)(4pcs)
Tower height (ft.)
39 (12m)
The weight of generator (lb)
324 (147kg)
Suggested Battery (Ah)
400/600

High efficiency Hummer 100000W wind power turbine wind generator system

10KW wind power turbine
--PLC control system
-touch screen for remote control
-low noise with SKF bearings
-smaller,lighter
High efficiency Hummer 100000W wind power turbine wind generator system

rated power
10000w
max power
15000w
battery bank voltage VDC
240
system output voltage VAC
380
start up wind speed
3m/s
rated wind speed
10m/s
working wind speed
3-25m/s
survival wind speed
50m/s
generating efficiency
above 0.85
wind energy utilizing ratio
0.4
generator type
PMG
blade material and quantity
GRP/3
speed regulation method
yawing, electromagnetism braking
shutting down method
manual and automatic


1. guy tower, free standing tower, hydraulic tower optional.
2.wind vane and anemometer indicating wind direction and measuring wind speed, transmitting wind signal to PLC controller.
3. yaw shaft with the slip ring to ensure the rotation at 360 circulation.
4.Siemens PLC controller receiving wind signal and operation signal, quick in reaction, reliable and intelligent.
5.rectifier, dump load, inverter seperately equipped.
6.rectifier rectifying and controlling the dumping load.
7. dumping load made of metal box, heat dissipation by air convection, without the fan and the controlling box.
8. off grid inverter adopting SPWM technology, amorphous transformer and high frequency breaker, with high converting efficiency, outputting stable frequency and voltage, filtering out noise, low distortion of pure sine wave.
9. hydraulic brake optional.

High efficiency Hummer 20KW Wind Turbine Generator

20KW wind Turbine
-PLC control system
-touch screen for remote control
-low noise with SKF bearings
-smaller,lighter,fast
High efficiency Hummer 20KW Wind Turbine Generator


Application of

Model H9.0-20000W
It can drive air-condition ( ≤20 horsepower), 6kw water pump or other resistive appliances (≤20KW).
Well used in:
Housing and factory and farm
Telecommunication Station
TV Transfer Station
Monitoring Station (military, hydrology, observatory)
Water-pumping Station
shipping


Main technical parameter
Rated power(W)
20000
Maximum output power(W)
30000
Charging voltage (V)
DC 240
Blade quantity
3
Rotor blade material
GRP
Rotor blade diameter (ft.)
30 (9.0m)
Start-up wind speed (mph)
7 (3.0m/s)
Rated wind speed (mph)
26 (11.5m/s)
Rated rotating rate (r/min)
180
Wind energy utilizing ratio (Cp)
0.40
Generator output
Frequency conversion AC
Rated charging current (A)
83.3
The maximum charging current (in a short time) (A)
120
Output AC frequency (Hz)
0~320
Generator efficiency
>0.87
Free standing tower diameter (in.)
41.3*29.5 (1050*750mm)
(2 segment)
Tower height (ft.)
52 (16m)
The weight of generator(lb)
1093 (496kg)
Suggested Battery (Ah)
800/1000

High efficiency china 2KW wind generator with CE certificate

2KW wind generator
1.CE proved+7 patents
2.high efficiency+small size
3.NO MOQ+wholesale price

Industrial grid-tied 2KW wind generator
Hummer 2kw small wind turbine which features high efficiency and low rated
wind speed introducing several patented technologies and some special materials.

Application of Model H3.8-2000W
It can drive air-condition (2 horsepower), pump or other electrical appliances (≤2KW).
Well used in:
Housing
Telecommunication Station
TV Transfer Station
Monitoring Station (military, hydrology, observatory)
Water-pumping Station

Main technical data
Rated power(W)
2000
Maximum output powerW
3200
Charging voltage (V)
DC 120
Blade quantity
3
Rotor blade material
GRP
Rotor blade diameterm
3.8
Start-up wind speed (m/s)
3.0
Rated wind speed (m/s)
9.0
Rated rotating rate (r/min)
450
Wind energy utilizing ratio (Cp)
0.45
Generator output
Single-phase
frequency conversion AC
Rated charging current (A)
16.7
The maximum charging current (in a short time )(A)
28
Output AC frequency (Hz)
0~370
Generator efficiency
>0.8
Tower diameter(mm)
114*2000*54(5pcs)
Tower height(m)
10
The weight of generator(kg)
25
Battery 12V 150Ah/200Ah
10pcs

High efficiency mini solar system for home lighting

Mini solar system
2PCS super bright LED
8 hours working time
Free-maintance NI-MH battery
OEM service is available
Mini solar system
2PCS super bright LED
8 hours working time
Free-maintance NI-MH battery
OEM service is available

Products Description:

1) Solar panel: 2W poly silicon tempered glass encapsulated
Life time:25years Encapsulation methods toughened glass package
2) Battery: 3pcs1.2V/1800mAh NI-MH rechargeable battery.
Item
Cycles
Charge
Rest
Discharge
Life of Cycle Use
(≥500 cycles)
1
180mA×16h
None
450mA×140min
2-48
450mA×190min
None
450mA×140min
49
450mA×190min
None
450mA to 1.0V/Cell
50
180mA×16h
1-4h
360mA to 1.0V/Cell
Life Expectancy of Standby Use (20°C)
3 Years

3) Input: sunlight
4) Output :DC6V
5)Working time:
Battery was fully charged
1pcs 6V 0.8W LED
8-10h
2pcs 6V 0.8W LED
4-6h
Battery was charged by one sunny day
1pcs 6V 0.8W LED
8h
2pcs 6V 0.8W LED
4h

High efficiency wind energy 300w

High efficiency wind energy 300w
1High efficiency
2Reliable quality wind turbine
3Favorable price
4CE,RoHs certificate
High efficiency wind energy 300w

Welcome to choose Effsun wind turbine generator manufactured by
ShenZhen EFFSUN Wind Power co., ltd.
We glad to offer you wind turbine with the advantages of easy installation,stable performance ,simple maintenance and strong service durability.

Technical parameter
Rated power(w)
300
400
500
1000
2000
3000
5000
10kw
20kw
Rated wind speed(m/s)
8
9
8
9
10
10
10
11
12
Start-up wind speed(m/s)
2
2
2
2.5
2.5
3
3
4
4
Working wind speed(m/s)
3~20
3~25
4~25
Survived wind speed(m/s)
35
35
35
40
40
40
40
45
45
Rated rotate speed(r/min)
420
420
480
500
450
300
260
200
200
Rotor diameter(m)
2.2
2.2
2.8
3.2
4
5.2
6
7.5
10
Generator rated voltage(v)
AC28
AC28
AC28
AC56
AC56
AC240
AC240
AC360
AC500
Inverter rated AC output(v)
AC220
Blades material and quantity
Fiber glass
Heavy wind protection
Dump load + Electromagnetic brake
Work temperature °C
From-30°C to +60°C
Maximum power(w)
470
477
738
1510
2980
4159
6980
14000
25300
Speed regulation method
Mechanical Yawing + Electromagnetic Brake
Mechanical Yawing + Electromagnetic Brake + Manual brake
Generator style
3-phase AC PM
Tower height
6m
6/9m
9m


Shell material
Alloy aluminum
Precision steel
Free standing tower height
6m
9m
12m
15m
Matched inverter type
Sine wave


For more information you are intersted in,please contact us by phone or check on
our website(effsun.com)

High efficiency30000w wind turbine for home

30kw wind turbine
-PLC control system
-touch screen for remote control
-low noise with SKF bearings
-smart yawshaft


High efficiency30000w wind turbine for home
H10.0-30000W home wind generator is controlled by a comprehensive smart system.
Through our years of monitoring on wind turbine operation ,we successfully develop an automatic control system for small and medium scaled wind turbines.

This smart system is able to automatically seek wind direction and constantly monitor :generator working status,rotation speed,generator temperature ,wind speed and direction etc .All data will be transmitted to control center .
When abnormal situation takes place ,our control center will instruct wind turbine to deflect from wind direction .After problem is released wind turbinewill turn to face the wind direction again and resume generation .

H10.0-30000W home wind generator, both off grid and grid tied are available.

Application of 30000W home wind generator
It can drive air condition ( ≤30 horsepower), 10kw water pump or other resistive appliances (≤30KW).
Well used in:
Housing and factory and farm
Telecommunication Station
TV Transfer Station
Monitoring Station (military, hydrology, observatory)
Water-pumping Station
shipping

Main technical parameter
Rated power (W)
30000
Maximum output power (W)
45000
Charging voltage (V)
DC 360
Blade quantity
3
Rotor blade material
GRP
Rotor blade diameter (ft.)
33 (10.0m)
Start-up wind speed (mph)
6 (2.5m/s)
Rated wind speed (mph)
25 (11.0m/s)
Rated rotating rate (r/min)
160
Wind energy utilizing ratio (Cp)
0.42
Generator output
Frequency conversion AC
Rated charging current (A)
83
The maximum charging current (in a short time ) (A)
125
Output AC frequency (Hz)
0~400
Generator efficiency
>0.92
Free standing tower diameter (in.)
Φ
47.2*Ø18.7 (Ø
1200*Φ475mm)
Tower height (ft.)
59 (18m)
The weight of generator (lb)
1764 (800kg)
Suggested Battery (Ah)
600/1000

High efficiency30kw wind turbine for home

30kw wind turbine
-PLC control system
-touch screen for remote control
-low noise with SKF bearings
-smart yawshaft


High efficiency30kw wind turbine for home
H10.0-30000W home wind generator is controlled by a comprehensive smart system.
Through our years of monitoring on wind turbine operation ,we successfully develop an automatic control system for small and medium scaled wind turbines.

This smart system is able to automatically seek wind direction and constantly monitor :generator working status,rotation speed,generator temperature ,wind speed and direction etc .All data will be transmitted to control center .
When abnormal situation takes place ,our control center will instruct wind turbine to deflect from wind direction .After problem is released wind turbinewill turn to face the wind direction again and resume generation .

H10.0-30000W home wind generator, both off grid and grid tied are available.

Application of 30000W home wind generator
It can drive air condition ( ≤30 horsepower), 10kw water pump or other resistive appliances (≤30KW).
Well used in:
Housing and factory and farm
Telecommunication Station
TV Transfer Station
Monitoring Station (military, hydrology, observatory)
Water-pumping Station
shipping

Main technical parameter
Rated power (W)
30000
Maximum output power (W)
45000
Charging voltage (V)
DC 360
Blade quantity
3
Rotor blade material
GRP
Rotor blade diameter (ft.)
33 (10.0m)
Start-up wind speed (mph)
6 (2.5m/s)
Rated wind speed (mph)
25 (11.0m/s)
Rated rotating rate (r/min)
160
Wind energy utilizing ratio (Cp)
0.42
Generator output
Frequency conversion AC
Rated charging current (A)
83
The maximum charging current (in a short time ) (A)
125
Output AC frequency (Hz)
0~400
Generator efficiency
>0.92
Free standing tower diameter (in.)
Φ
47.2*Ø18.7 (Ø
1200*Φ475mm)
Tower height (ft.)
59 (18m)
The weight of generator (lb)
1764 (800kg)
Suggested Battery (Ah)
600/1000