3KW wind power generator for home use

Cheap, pollution-free and exhaustless,
Inconsumable wind power generation,
One-off investment for long-term benefit,
BLADES
Material: FRP (Fiber glass reinforced*3)
Diameter of wind wheel: 5.0M (=13.67 Feet )
Rated speed (rpm): 200
Rated wind speed:10M/S
Starte up wind speed: 3 M/S
Net weight:42K

GENERATOR
Type of generator: Permanent-magnet 3-phase A.C.
Stator: Silicon steel sheet
Magnet steel: NdFeB
Wire package: Copper wire
Net weight: 220KG
Material: aluminum alloy
Packing weight:243KG
Packing size: 92mm*53mm*43mm



CONTROLLER&INVERTER



1Technical Parameter

POWER RATE

3KW
WORK TYPE
DC-AC inverter
DC Input
Rated Voltage VDC

192
Voltage range VDC
168-240
Input current (no-load)

192VDC
<2
AC Output
Output Voltage
220VAC±5%
Output Frequency
50Hz±0.5%
Output Waveform
Pure sine wave
System Efficiency
>85%
Total Harmonic DistortionTHD
<3%
Stabilization Timems
<100
Crest Factor
>3:1(It can be customized)
Peak of Power (W)
>6.0kW
Weight
17.8Kg
Dimensions
L×H×W
465mm×162mm×321mm
yawp1M
≤40dB
Work Environment
Cooling-down Method
Air blast cooling
Environment Temperature
-2045/-4085
Relative Humidity
20%90% (No dew)
Height above sea level M
≤1000
Max temperature rise ()
60

Storage Temperature ()
-3070


2Security protection feature
protection feature
explanation
alarm
remarks
Overload Protection
120% for 20S /200% for 6S
Shut Output,LED display O.O.L. sound alarm
hand-reset
Short-circuit Protection
Shut Output
LED display O.S.t. sound alarm
Undervoltage Protection
Below168±1V, Shut Output
LED display I.n.L. sound alarm
It can be customized to be automatic reset or hand-reset
Overvoltage Protection
Input voltage over 240±1V, Shut Output
LED display I.n.H. sound alarm
Overheat Protection
The temperature of inverter inside over 80,then shut output
LED display t. H. sound alarm
3installation and using
3-1Please check the aspect of the inverter after open the box. If the inverter has been destroyed, please dont use it.
3-2Please read the specification before use the inverter.
3-3 Please ensure that the switch is turned off before connect the wires.
3-4The red terminal is positive pole ,connect the batterys positive pole; the black terminal is negative pole, connect the batterys negative pole.
3-5The inverter can be used in the system after turn on the switch.
3-6The wire between inverter and battery is as short as possible .Make sure that the inverter is dry and drawing.
4Matters needing attention
7-1The inverter has earthing terminal. Please connect it to earth wire when it is operating, preventing faradism from injuring human.
7-2Dont reverse all the terminals.
7-3Dont take apart the inverter ,there is high voltage in it.
Qingdao wind kind wind power generator Co.,Ltd,
manufacturer of wind turbines,which original name is Jiaonan wind kind wind power generator Factory, was founded in 1994(the same as yours). Since 2005, we change its name into Qingdao wind kind wind power generator Co.,Ltd.
Now our main product are off-grid wind turbines from 200W to 50KW, namely 200W, 300W, 600W, 1000W, 2000W, 3000W, 5000W, 10000W, 20000W, 30000W, 50000W Almost each spare parts of wind turbines we produce ourselves, so that the after-sale service will be easier. We also produce the on-grid type (1KW to 50KW). For example we now we are producting 30KW on-grid wind generators to our UK client. We are also a solar panels retailer. Because we usallay make wind/solar hybrid generation system to meet some requirement of our clients. Wind/diesel bybrid generation system is as well.