5KW wind turbine generator

CE/ISO certification
Galvanized tower
Good quality and competitive price


About us:
Qingdao Wind King Wind Power Generator Co,.Ltd. is one of the largest manufacturers.You can trust in China.Our company founded in 1994.It is specialized in producing and developing wind turbines from 200w to 50kw,solar panels.Our company has permanent-magnet generator professional technical teams from product design, manufacturing, testing and sale to service. There is a perfect management system.
Advantage:
Use of rare earth permanent magnet materials, professional magnetic circuit design,easy to low-wind start, automatically adjust the facing wind direction,use of closed power transmission slip ring,cables are not enwind, constant voltage charging,with over charge, over discharge, AC unloading and short-circuit protection, careful anti-corrosion treatment, stable operation, without special maintenance, long service life.

BLADES
Material: FRP (Fiber glass reinforced*3)
Diameter of wind wheel: 6.0M (=16.41 Feet )
Rated speed (rpm): 220
Rated wind speed:10M/S
Starte up wind speed: 3 M/S
Net weight:48KGS

GENERATOR
Type of generator: Permanent-magnet 3-phase A.C.
Stator: Silicon steel sheet
Magnet steel: NdFeB
Wire package: Copper wire
Net weight: 210KG
Packing weight:243KG
Packing size: 92mm*53mm*43mm
CONTROLLER&INVERTER
1Technical Parameter
POWER RATE

5KW
WORK TYPE
DC-AC inverter
DC Input
Rated Voltage VDC

216
Voltage range VDC
190-240
Input current (no-load)

216VDC
<2
AC Output
Output Voltage
220VAC±5%
Output Frequency
50Hz±0.5%
Output Waveform
Pure sine wave
System Efficiency
>85%
Total Harmonic DistortionTHD
<3%
Stabilization Timems
<100
Crest Factor
>3:1(It can be customized)
Peak of Power (W)
>10.0kW
Weight
28.8Kg
Dimensions
L×H×W
460mm×426mm×132mm
yawp1M
≤40dB
Work Environment
Cooling-down Method
Air blast cooling
Environment Temperature
-2045/-4085
Relative Humidity
20%90% (No dew)
Height above sea level M
≤1000
Max temperature rise ()
60

Storage Temperature ()
-3070


2Security protection feature
protection feature
explanation
alarm
remarks
Overload Protection
120% for 20S /200% for 6S
Shut Output,LED display O.O.L. sound alarm
hand-reset
Short-circuit Protection
Shut Output
LED display O.S.t. sound alarm
Undervoltage Protection
Below 190±1V, Shut Output
LED display I.n.L. sound alarm
It can be customized to be automatic reset or hand-reset
Overvoltage Protection
Input voltage over 240±1V, Shut Output
LED display I.n.H. sound alarm
Overheat Protection
The temperature of inverter inside over 80,then shut output
LED display t. H. sound alarm
3installation and using
3-1Please check the aspect of the inverter after open the box. If the inverter has been destroyed, please dont use it.
3-2Please read the specification before use the inverter.
3-3 Please ensure that the switch is turned off before connect the wires.
3-4The red terminal is positive pole ,connect the batterys positive pole; the black terminal is negative pole, connect the batterys negative pole.
3-5The inverter can be used in the system after turn on the switch.
3-6The wire between inverter and battery is as short as possible .Make sure that the inverter is dry and drawing.
4Matters needing attention
7-1The inverter has earthing terminal. Please connect it to earth wire when it is operating, preventing faradism from injuring human.
7-2Dont reverse all the terminals.
7-3Dont take apart the inverter ,there is high voltage in it.