wind power system from 200w to 30kw

wind power system
1.advanced and complete system
2.designing and making workshop,
3. on-grid and off-grid for optional
wind power system
Angel series

match controller
features
1.
1.5 ~ 2m/s start up wind speed with low torque starting technique applied.
The Reason: Generator make up of 27 skewed slots stator and 12 poles rotor which reduced the cogging torque.
(Patent No.:201020259729.8)

2.
The design of blades: The blade casted into molding at one time with balance up to 99%.
3.
Light generators (only 7.5kg for 200W/300W, 8.5kg for 400W) make the installation easier and cheaper.
4.
The turbine tail and yawing part (nylon and fiberglass materials with high strength) processed with reinforced ribs, enhance the reliability and can withstand the typhoon.
5.
Carbon brush casted into molding at one time, it can reduce the contact resistance effectively and the lifetime is up to 100000 times. (Patent No.:200920265082.7)

FD-M wind turbine
match controller
Magnetic saturation generator design, 20years designed life.(Patent No.ZL 2007 2 0010261.7)
2-2.5m/s start-up wind speed under low torque start-up technique.(Patent No.201020259728.3)
Mechanical automatic yawing.
500W, 600W and 1KW blades are casted into molding at one time with balance up to 99%.
Bearings import from Japan (NSK), long service time (5 years maintenance-free).
Magnetic saturation design, the generator coil couldn’t burn down because of the increasing power, when generator runs at a super wind speed and saturates automatically.
Low cut in wind speed (3m/s) to guarantee the maximum generation at low wind speed.
FD-D wind turbine

match controller
Features
Special design in generator with low starting technique applied, start-up wind speed low to 2-2.5m/s and cut-in wind speed low to 3-3.5m/s.(Patent No.201020259726.4).
Magnetic saturation generator design, engage for the safety of generator and the 20 years lifespan of generator. (Patent No. 201020296641.3)
Blade flange processed with reinforced rib increasing the intensity. Blades are in good angle to make sure the start-up wind speed in 2-2.5m/s.
NSK Bearing from Japan which have a long lifespan.
Worm gear is made from copper, which with high tenacity, and worm is made from chromium to make sure the lifespan.
Worm and worm gear specially assembled to make the clearance small.
First design of MPPT function from wind turbine to make sure the wind turbine have the rated output when the wind turbine over the rated wind speed.(It’s been applied for patent)
Special signal transmission system, wind vane and wind anemoscope no need to be on the wind turbine any more. (It’s been applied for patent).
Mechanism brake for your option.
Complete isolation design with stable quality to make sure the controller can work in extreme conditions. Life time can reach up to 6 years.
Matched controller with PWM charging (Patent No. 200910213782.6), electronic and manual brake (Patent No. 200910213784.5), dump load (Patent No. 200910213783.0), untwisted protection (Patent No.200910213785.X).
Each parameter showed on the LCD display of the controller. Some parameters are adjustable and can be set by yourself.