20KW Micro hydroelectric Generator

20KW Micro hydro Turbine Generator. This is a "Green" Product,
20KW Micro Hydro Turbine Generator

XJ30-20SCTF4/6-Z is a AC direct systems consist of a turbine-generator unit producing AC power which is used as needed. That is, it is fed directly to the appliances. No need of battery and inverter, XJ30-20SCTF4/6-Z offers a complete water to wire system with integral turgo turbine, generator and valve flow control. Designed to deliver ready-to-use 380V AC /3 phase power, it employs a brushless, special rare-earth permanent magnet alternator and therefore has a higher efficiency than ordinary alternator. Output voltage and frequency are controlled by the electronic load controller(with ballast). As little as 60 to 80 liter per second (l/s) falling 45 meter through a pipe can supply enough power to comfortably run a household. This machine is compact, easy to install and requires little maintenance except lubricating the bearing every few months.
Specification
Water Head Range : 30 - 45 meters
Water Flow Range : 60 80 liter/second
Power output : 20 KW
Voltage : 380V AC, 3 Phase
Penstock Diameter: 250 - 300 mm
Packing Size : 1) 120x90x95cm, 490kg.
2) 80x60x62cm, 60kg
3) 60x55x50cm, 60kg

The turgo turbine was designed for families in remote areas to produce power for their households easily and inexpensively. These units have been incredibly successful and today thousands are installed throughout the world.

These turbines need very little water flow to run efficiently and produce significant power out. The standard configuration uses one nozzle
Water is collected upstream from the turbine and channeled in a pipe down to the turbine location. At the turbine, the water passes through a nozzle, where it accelerates, strike the turbine runner, and turn a AC three-phase brushless permanent magnet alternator. A electric load controller is built on the alternator which stabilizes the voltage to 380V to protect electrical appliances during use. Installation is very simple and explained in the manual. Once installed there are no running costs and maintenance costs are very low.